The Highest Performance Lubrication Technology in Existence
Nu-Science Lube provides massive cost savings in machine reliability and performance through advanced chemistry for metal protection and lubrication.
A Paradigm Shift for Lubricants
An interruption to current technology
Nu-Science is breakthrough technology for dramatically enhancing performance of lubrication, by nearly eliminating friction and wear on Ferrous metal and certain other metal surfaces. No other material or technology matches the sustainability and performance. The performance is phenomenal. The sustainability of performance is incredible.
If you have a great deal of knowledge and understanding with respect to lubrication, brace yourself for a serious paradigm shift to either greater success or to overwhelming competition, depending on whether you embrace or reject the inevitable change to using a radically advanced new technology.
Comparatively speaking, Nu-Science Lube is like taking the technological leap from a plow horse to a 4 wheel drive tractor that emits no pollution.
Discover Super Advanced Performance
Extreme performance far beyond any lubricant in existence.
Reduces Friction and Wear to Nearly Zero
Not Just an Improvement, a Leap in Technology
Not just safer, FR99 is Completely Environmentally Safe
The workhorse material in all Nu-Science Lube products is Enduravite™(“FR99”). FR99 is a complete departure from lubrication technologies that have been in use prior to its existence.
What it does:
Available in concentrate or in mixture with other lubricating media, Enduravite™ FR99 dramatically cuts wear on metal parts in any application where a significant level of friction is present. It cleans metal surfaces, dissolves oxide or rust, and stops further corrosion to metal. It also prevents the reactions that create toxins within petroleum lubricated systems. It sustains itself for an amazing length of performance, not for so many hours or weeks, but months, even years.
FR99 handles even the extreme applications, all of them, combined or separately, extending Mean Time Between Failure to hundreds of percent improvement. Normally at least 400% of previous Best Practice Performance. Now that is a mighty big statement to make! Those who read this and have employed this technology will say “amen to that”. If you have not employed this innovation, you probably should before your competitors do. It’s easy to test. The results are clear, obvious, measurable, and mind blowing. In machinery, you will see major increases in performance reliability from reduced operating temperature, vibration, noise and metal wear, while also seeing increased efficiency, performance, production or horsepower. We are not talking about small differences. You have to see it to get the picture. All this, plus it is safe for us and healthier for our environment. Also, all lubricants work well, until they don’t….. The sustainability of Nu-Science Lube metal treatment technology is absolutely unmatched. NOTHING else even comes close to its’ longevity of performance,which is why it provides such impressive increases in equipment reliability and longevity
Unmatched Performance
Unmatched Sustainability of Performance
How it works:
Renders Film Fluid Strength Lubrication Obsolete
Prevents Corrosion by
Blocking Contaminants
Most of the frictional wear on metal surfaces is actually the result of weakened metal from corrosion. Corrosion on metal is catalyzed by environmental elements in air and moisture present within lubricated systems, and even by some additives which are intended to increase fluid film strength for better lubricating capabilities. For decades, additives of mostly chlorinated ions gave lubricants the ability to perform better in different applications. Nu-Science Lube FR99 blocks the environmental elements from contacting treated metal surfaces. When there is no oxygen or other catalyst, there is no corrosive reaction. This is also true of Fluid Film Strength technology, except that Fluid Film Strength falls far short of full effectiveness. The performance of FR99 is sustained far beyond that of any Fluid Film Strength technology, and beyond that of materials defined as “surface modifiers” or “nano-technologies”. When friction occurs and one surface contains ferrous metal (carbon steels, stainless steels, cast iron, high alloys). Enduravite™ FR99 catalyzes non-corrosive reactions on Ferrous metal friction points causing phase transformation into Duravite™. Duravite™ is a densified molecular structure of Ferrous atoms that is extremely durable, extremely hard and extremely slick with continuous embedded lubricity. The coefficient of friction drops to .001, which is sustained, and then tends to reduce even further. With the resulting absence of friction, heat or corrosion, metal wear is reduced to nearly nothing compared to other means of lubrication. The increases in wear life exceed 1000% in many applications and nearly never less than 300%. Fluid Film Strength technology has a trade-off. Enduravite™ FR99 provides the best of both. Corrosion is eliminated, plus friction reduction far surpasses the capabilities of Fluid Film Strength technology.
Nu-Science Lube is a proprietary new material derived from plant materials grown in the USA, and chemically modified to act as a metal protector and surface enhancer, cleaner and degreaser. It mixes readily with petroleum and other lubricants, including materials such as soybean or corn oil. Nu-Science Lube FR99 concentrate only uses a lubricant as a “carrier” to take it to the places where friction and wear normally occur, where it dramatically reduces friction and wear on ferrous and certain other metals. Because it is bio-based, it is a safe product for people, animals and our environment. FR99 stops the creation of toxins that always occur within petroleum based lubricated systems, which makes it an environmental protector as well as metal protector. Available in concentrate or in mixture with other lubricating media, the acting material FR99 cleans metal surfaces, penetrates the substrate and bonds to metals at the molecular level with a strong chemical bond. It dissolves oxide or rust, and it stops further corrosion to metal.
Our Products
What it is:
What it costs:
This product will be the least expensive material you probably ever purchased for any lubrication related purpose. The cost is usually less than 1% of the savings it produces. But if price is all you look at, you probably should look elsewhere, because it’s not cheap by the volume, but by what it saves in increased equipment life, parts, labor, downtime, etc. Price is based on volume and free for testing on a limited basis. (See test samples under Contact Us). Request a quote by application or services. We are not in the business to see how much we can sell, but to see how many long-term customers we help grow stronger while helping to protect our environment and keep us all healthier. We think this provides a value far greater than the cost of our products.
Lubricant Testing
Oil Condition Sampling with FR99 consistently exhibits radically improved oil condition for extended performance of every oil tested.
ASTM and most recognized test methods for lubricants were developed for comparing performances of standard technology lubricants. Nu-Science Lube technology far surpasses the standards of ASTM. Using ASTM testing is like comparing standard automotive performance to the performance of an aircraft. You only get to compare how an aircraft rolls on the ground, not how it excels in transportation speed and efficiency. If you are familiar with FZG testing, Nu-Science Lube is off-the-charts, ridiculously surpassing any lubricant ever tested. Again, it’s like trying to rate an aircraft by how it’s landing gear takes corners. Not only does Nu-Science Lube obsolete petroleum lubricants, even the test methods are now obsolete.
Put it to the test in any application. Prepare to be impressed.
Lubricant Testing
We provide samples on a limited basis for testing and evaluation purposes. To ensure our products are used appropriately for maximum benefit, we would like to be involved in most applications.
Please send an email with your request. Include as much information as reasonably possible about your application(s) and about your company or organization. Include shipping address and a phone number where we may contact you.
